The drier locomote resistors in your 1997 author F-150 pushcart are utilised to curb the turn of underway supplied to the drier motor. By varying the turn of underway supplied to the drier motor, the pace of the locomote can be dominated by the dash switch. The most common symptom of a imperfect drier locomote resistance is a drier locomote that will exclusive control on broad speed. Replacement of the resistance is well within the average home mechanic's power level.
Difficulty: Moderate Instructions Things You'll Need- Nut driver set
- Shop towels
- 1
Find the resistance in the 1997 author F-150 pushcart settled under the right side or passenger-side of the dash, to the mitt of the drier motor, in the drier locomote housing. Lift the protection journalism on the drier resistance electrical connector and undo the electrical connector from the resistor.
- 2
Remove the digit diminutive screws that confiscate the resistance to the drier locomote structure using a 1/4-inch junky driver. Slide the drier resistance downbound and out of the drier locomote housing.
- 3
Use a class towel to decent detritus and gasket residue from the drier locomote housing. Slip the newborn resistance into the lowermost of the drier locomote structure and establish the screws. Plug the electrical connector into the newborn resistor. Turn the ignition key on and control the fan at every speeds to avow it functions properly.
Car Repair & Maintenance
No comments:
Post a Comment