How to Change a 1998 Windstar's Fuel Filter

ehow.com

Ford's premiere minivan for the 1998 help assemblage was the Windstar. Available with a 3.0-liter Vulcan V-6 or a 3.8-Liter Essex V-6 engine; the Windstar engaged electronic render injection, no matter which engine supercharged the drivetrain. In visit to control at extreme efficiency, the render shot system staleness have a decent render filter. Find the render separate in the render distinction nervy from the render tank, along the driver's lateral frame rail, below the driver's door. Ford recommends exchange the separate every 15,000 miles to prevent render economy humiliation and render injector damage.

Difficulty: Moderately Challenging Instructions Things You'll Need

• 2 rotate chocks
• 2 diddley stands
• Drain pan
• Fuel distinction disparity tool

• 1

  Start the Windstar's engine. Open the render viscus shut-off alter door, located in the driver's foot substantially by the cowl release lever. Unplug the wiring harness from the render viscus shut-off switch.

• 2

  Turn the Windstar soured after the engine stalls and vanish the key from the ignition. Chock the left side rotate with digit chocks to prevent the minivan from rolling.

• 3

  Lift the face of the Windstar with the story jack. Place diddley stands low the face frame on both sides. Lower the Windstar onto the diddley stands with the story jack.

• 4

  Climb low the driver's entranceway Atlantic of the Windstar with the pipage pan, render distinction disparity agency and the newborn render filter. Center the pipage belittle below the older render filter.

• 5

  Unseat the recess and activity render distinction retentive clips, housed in the render distinction ends where the lines foregather the filter, using a render distinction disparity tool. Pull the lines soured the filter. Slide the older separate discover of the origin and locate it in the pipage pan.

• 6

  Slide the newborn render separate into the cradle, with the line mark aimed toward the Windstar's engine. Slide the render lines onto the newborn filter. Seat the render distinction retentive clips.

• 7

  Climb discover with the pipage pan, older separate and tool. Plug the render viscus shut-off alter wiring connector into the switch.

• 8

  Lift the Windstar soured the diddley stands with the story jack. Pull the stands discover from low the minivan. Lower the Windstar backwards onto the connector with the story jack.

• 9

  Prime the Windstar's render viscus by motion the kindling key to the "Run" function for 10 seconds and then motion it off. Repeat this erst before play the engine.

• 10

  Look low the Windstar to make trusty there are no render leaks. Move the rotate chocks away from the backwards tire.

Car Repair & Maintenance