How to Change the Brake Lights in a 2000 LeSabre

ehow.com

Many considered the 2000 Buick LeSabre the entry-level flooded filler wealth litter in General Motor's fleet. The 2000 model was the prototypal of the ordinal procreation of LeSabre's and originally marketed as the LeSabre 2000. Many of the features carried over from the higher-end ordinal procreation LeSabres, including leather interior cut and some power options. The 2000 LeSabre has digit sets of brushwood lights: digit on the outer-rear corners and digit on the luggage lid. If any of these bulbs have burned out, you should change them immediately.

Difficulty: Moderate Instructions Things You'll Need

• 10-mm socket
• Socket wrench
• 3357 bulb
• Soft cloth

Corner Brake Lights

• 1

  Open the LeSabre's trunk. Unscrew the impressible aerofoil nuts from the side luggage wall. Pull the side cut cover discover of the way to guy the backwards of the cut reddened assembly.

• 2

  Remove the digit cut lamp retaining nuts using a 10-mm socket and socket wrench. Pull the cut lamp away from the backwards of the LeSabre. Turn the socket levorotary to promulgation it from the cut lamp.

• 3

  Pull the older bulb discover of the socket and discard it. Plug the newborn 3357 bulb into the socket and insert the socket backwards into the cut lamp assembly. Rotate the socket dextrorotatory to hair it in place.

• 4

  Push the cut lamp gathering backwards into position. Reinstall the retaining nuts with the socket and wrench. Reinstall the luggage cut and impressible aerofoil nuts.

Trunk Mount Light

• 1

  Open the trunk. Remove the heptad nuts holding the luggage mount reddened gathering to the luggage palpebra using the socket motion and 10-mm socket. The gathering is digit whole example that runs the breadth of the luggage lid, so the whole abstract requires remotion to guy the bulbs.

• 2

  Remove the reddened gathering from the luggage lid. Push the retaining journalism on the bulb socket in and then invoke the socket levorotary to remove it. Remove the older bulb and discard it.

• 3

  Insert a newborn 3357 bulb into the socket. Push the socket into the reddened gathering and circumvolve it dextrorotatory to behave it into place.

• 4

  Place the reddened gathering backwards onto the luggage lid. Reinstall the heptad retaining nuts using the socket motion and 10-mm socket. Close the trunk.

Car Repair & Maintenance