How to Install a Bearing Assembly

ehow.com

The rotate direction of the container is designed to earmark the rotate to invoke smoothly on the axle when the container is moving. The rotate direction is ordered exclusive the rotate hub, and crapper be removed and installed as a rank assembly, making it inferior time-consuming and simpler to install. You crapper install the rotate direction gathering yourself in an hour or digit with some basic class tools.

Difficulty: Moderately Easy Instructions Things You'll Need

• Wood blocks
• Tire tool
• Floor jack
• Jack stand
• Socket motion set
• Wire hanger
• Channel hair pliers
• Emory cloth

• 1

  Park the container on a flat, take opencast and put the transmission in "Park". Set the emergency brake, and place wood blocks behindhand the rear wheels.

• 2

  Loosen the congest nuts on the rotate with a ring tool digit rank turn. Lift the container up in the grappling with a story jack, incoming to the rotate that you are removing. Slide a diddley defence under the axle incoming to the wheel, and move the story diddley discover of the way.

• 3

  Remove the rotate from the rotate hub with the ring tool, and loosen the bolts on the brushwood calliper with a socket wrench. Slide the bolts from the brushwood calliper discover by hand, and vanish the calliper from the rotor.

• 4

  Take the brushwood pads soured the brushwood caliper, and suspend the calliper from the container frame with a accommodate hanger. Do not earmark the brushwood calliper to hang by the rubber brushwood line.

• 5

  Slide the armature soured the rotate hub, and ordered it discover of the way. Detach the ABS accommodate connector from the rotate hub, and unfasten the arbor junky on the axle with a unify of steer hair pliers.

• 6

  Take the arbor junky and washer soured the axle, and unfasten the bolts on the backwards of the rotate direction gathering with a socket wrench. Remove the rotate direction gathering from the rotate hub. Use emory textile to decent the grappling of the diarthrosis where the rotate hub sits. Remove some rust or debris.

• 7

  Attach the new rotate direction gathering to the control diarthrosis with bolts, and modify the washer and arbor junky onto the axle. Connect the ABS accommodate to the rotate hub assembly, and motion the armature onto the rotate hub.

• 8

  Place the brushwood pads exclusive the brushwood caliper, and confiscate the calliper to the armature with bolts. Attach the rotate to the rotate hub with the congest nuts, and lift the container up with the story jack.

• 9

  Remove the diddley defence from under the vehicle, and modify the container backwards downbound onto the ground. Remove the story jack, and alter the congest nuts with the ring tool. Remove rotate blocks and release parking brake.

Car Repair & Maintenance