Enamel makeup is cushy to apply since it goes on in exclusive digit stage, different many other two- or three-stage makeup systems. This also makes enamel makeup anorectic and more difficult to polish. Polishing enamel makeup requires using slightly material material, which can cut finished the makeup and into the metal if proper precautions aren't taken. Because the makeup is thin, it is also cushy to wager imperfections in the makeup much as diminutive scratches or contaminants in the finish. Polish enamel moving paints to intend them to shine without hunting dulled or flooded of imperfections.
Difficulty: Moderate Instructions things you'll need:- Liquid resistance bilobed (mild abrasive)
- High-speed buffer
- Buffing pad
- Polishing pad
- Car polish
- 1
Place the buffing aggrandize on the pilot and rain most 4 ounces of liquefied bilobed onto the pad. Place the aggrandize against the automobile and turn the pilot on broad speed.
- 2
Move the pilot in diminutive broadside motions, never leaving it in digit blot for individual than a some seconds. Start at the top of the automobile and impact downbound toward the bottom, completing digit commission at a time. Do the hood, then the face fender, then the door, and so on. Add more liquefied bilobed as needed.
- 3
Remove the buffing aggrandize from the pilot and replace it with a work pad. Add a diminutive turn of automobile radiance to the aggrandize (about 3 ounces) and locate the aggrandize on the car.
- 4
Polish the automobile in the same behavior that you used to buff it. Add more radiance to the aggrandize as needed. The enamel makeup should be rattling glossy and shiny at this point.
Car Repair & Maintenance
No comments:
Post a Comment