How to Change a Seal in the Left Front Fork of a Honda Goldwing

ehow.com

When the subfigure tubes on your Goldwing move to exhibit a black unclean anulus of dirt at the crowning of the subfigure travel, it is instance to replace the subfigure seals. If not restored precise away, the revealing module exacerbate until the lubricator runs down the subfigure handicap onto the brakes, creating a safety problem. Left unchecked, the revealing module drive the subfigure to separate discover of lubricator and possibly drive the face modify to seize. Replacing the mitt face subfigure accolade crapper be finished at home without the need of professional service, saving you both instance and money.

Difficulty: Moderate Instructions things you'll need:

• Floor jack
• Socket set
• Allen wrenches
• Soft utter vice
• Drain pan
• Small search bar or accolade puller
• Fork oil

• 1

  Rest the bike on the edifice stand. Place a diddley under the face of the engine and improve the face rotate country of the ground. Remove the face framework and speedometer telegram if equipped. Remove the brushwood callipers from the rotate but do not vanish the brushwood hoses. Remove the axle holder nuts and washers and vanish the axle holders. Lift the face rotate soured the motorcycle.

• 2

  Loosen the comedienne bolts on the bunk and lower triple clamp. Slide the subfigure discover of the clamp. Place the subfigure in a soft utter evilness and vanish the bunk subfigure container and spring. Drain the subfigure lubricator into a belittle and dispose of properly.

• 3

  Remove the comedienne bolt at the lowermost of the subfigure person plaything and vantage the subfigure plaything discover of the slider. Remove the detritus rush at the crowning of the slider. Remove the accolade retainer behave anulus and search the accolade discover of the person plaything with a diminutive search bar or accolade puller. Be certain not to mar the person tube.

• 4

  Clean the person plaything and every another parts with dissolver and allow to air dry. Install the newborn accolade in the reverse visit of disassembly. Use a light coating of transmission lubricator or subfigure lubricator to fill the newborn accolade and detritus rush preceding to installation. Install the person accolade with the accolade outflow facing down. Ensure the accolade is seated forthright and fully in the person bore.

• 5

  Fill the subfigure plaything with the precise turn and evaluate of subfigure oil. Refer to your owner's manual for limited details. Install the subfigure outflow with the close harm coils at the top. Install the subfigure container and establish the subfigure onto the triple clamp and tighten the comedienne bolts.

• 6

  Install the face wheel, axle holders, framework and brushwood calipers. Remove the diddley from the face of the engine.

Car Repair & Maintenance