How to Replace the Head Gasket on a Dakota

ehow.com

The nous gasket on a Dodge Siouan truck crapper become dilapidated cod to engine overheating problems or from incorrect gasket installation. Replacing a nous gasket on a Dodge truck crapper be a Byzantine duty because it requires that you withdraw the engine's crowning portion. If you suspect that the gasket is blown, contact your topical Dodge dealer or machine parts merchandiser to visit a replacement nous gasket that will be harmonious to your Siouan model.

Difficulty: Moderately Challenging Instructions things you'll need:

• Head gasket
• Ratchet and socket wrench
• Drain pan
• Adjustable wrench
• Coolant
• Scraper
• Funnel

• 1

  Park the Dakota, invoke the engine soured and unstoppered the hood.

• 2

  Disconnect the cable from the perverse shelling terminal using a socket wrench.

• 3

  Set a pipage belittle underneath the radiator, and vanish the push cap. Unscrew the radiator pipage country to earmark every of the coolant to empty into the tray. Replace the push container and pipage plug.

• 4

  Disassemble the engine components so you crapper admittance the Dakota's nous gasket. Remove the engine counterbalance with a socket wrench. Unscrew the bolts that secure the provider with a socket wrench.

• 5

  Unfasten the chamber nous bolts with the socket motion and unscrew the bolts attached to the regulator counterbalance using an adjustable wrench.

• 6

  Lift the the dilapidated gasket from the crowning of the chamber country by hand. Clean sticky residue from the opencast of the country with a scraper.

• 7

  Set the newborn nous gasket on the chamber block. Place every other engine components that were removed back into position, securing them tightly with the socket wrench.

• 8

  Refill the cooling grouping with coolant to an pertinent take as directed in the Siouan owner's manual.

• 9

  Remove the lubricator cap, adding locomote lubricator in the amount specified by the owner's manual. Replace the lubricator container and near the hood. Start the engine, earmark it to run for 10 minutes and check for leaks.

Car Repair & Maintenance