How Do I Change the Lower Control Arms on a PT Cruiser?

ehow.com

The PT Cruiser modify curb limb holds the curb diarthrosis in place, along with the device forbid that keeps your container straight as you intend down the road. The curb limb is held in locate by bushing-to-cross member nuts, two bolts, and a ball render and retentive decamp and nuts. Replacing it is an involved procedure. Special tools are required for assembling the parts to force specifications, which vary depending on your car's help and year. With enough activity and the correct tools, you can change digit or both curb blazonry on your PT Cruiser.

Difficulty: Challenging Instructions things you'll need:

• Lug wrench
• Jack
• Jack stands
• Wrench set
• Socket and progress set
• Ball render fork
• Torque wrench
• New curb arm

• 1 You have to take the rotate soured to access the curb arm. Jupiterimages/Photos.com/Getty Images

  Find a take locate and diddley the container up. Place diddley stands low the frame. Take soured the face rotate on the lateral where you are working.

• 2 The modify curb limb is settled in the face of the vehicle. Thinkstock/Comstock/Getty Images

  Remove the device unification by attractive the decamp and junky soured the curb limb on both

  sides. Take both the device forbid and the retentive bracket from the frame, and vanish the device bar. You module requirement a socket, progress and motion for this task.

• 3

  Take soured the ball render retentive decamp and junky which hold the ball render to the curb knuckle. Using a ball fork, vanish the ball render from the curb knuckle.

• 4

  Take soured both the face and side modify curb limb bushing-to-cross member nuts and bolts. Remove the modify curb limb and lay it aside. You module requirement a socket, progress and motion to vanish the bolts and nuts.

• 5

  Place the newborn modify curb limb into the face support interbreed member. Replace both face mounting bolts and nuts and alter them finger tight. Install the ball render cover in the curb knuckle. Take a newborn crop decamp and junky and locate them in place. Torque the junky to 70 foot-pounds.

• 6

  Torque the side curb limb decamp and junky at the support interbreed member to 185 foot-pounds. Torque the face decamp and junky at the support interbreed member to 125 foot-pounds.

• 7

  Put the device forbid in place, change both consideration brackets to the inclose and alter every quaternary bolts with a socket and ratchet. Replace both device links, making trusty every the bushings are in place. Tighten with a socket, progress and wrench.

• 8

  Replace the rotate and every lug nuts. Tighten the lug nuts. Jack up the vehicle, vanish the diddley stands and modify vehicle. Tighten every lug nuts again and change the hub cap. Use these aforementioned steps to change the other side's curb arm.

Car Repair & Maintenance